Archive for the ‘Computers’ Category

Blogging from the Win98 wall computer..

Saturday, July 4th, 2009

Greetings.

This is a blast from the past. This is being written from my Celeron wall computer running Win98. You really have to jump into win98 to realize how far we’ve gone in the past few years. If I could get a browser to work with Win3.1 I’d be using that!

wallcomputer003

Internet Explorer 6 is really funky. I used to love it, but that was before Firefox, extensions, flash and innumerable other things. I don’t really understand why I haven’t been hacked yet. Maybe Win98 isn’t the target anymore. Chasing after XP machines has to be more rewarding for the bad guys.

My wall computer is just a motherboard screwed to the wall with drywall scews. Probably not good for electrical shielding but everything seems to work ok. No problem with overheating either. I’ve got lots of other electronic junk screwed to the wall also, old cameras, hard drives and half a dozen other motherboards. Some, like this celeron, still work good, but I really haven’t thought up any good things for them to do. Maybe later.

I just hate to let anything die. Maybe it’s time to dust off my old Amiga 1000. Don’t think it has a browser either.

greg

Old IBM Thinkpad resurrected

Tuesday, May 5th, 2009

So my friend is throwing out an old IBM Celeron powered Laptop. I intercepted it before it became trash. Not much to talk about, a couple usb ports, really small harddrive, small everything, battery dead, etc.

It did have a PCMCIA network card. First I loaded Damn Small Linux, and it all worked fine. I connected to the internet, did a little research on Newegg, and ordered a linux compatible Edimax PCMCIA wireless card for $19 bucks. DSL however, wouldn’t recognize the card. I found myself in NDISWrapper hell. I did have linux drivers, but they wouldn’t compile, and this is documented in multiple discussion forums.

I decided to try loading several distros, to see if any of them would recognize the card. I loaded PCLINUX, which looked great, but no see card. I tried SLITAZ, same result. I tried Ubuntu, etc etc. No luck. Then I tried Freespire. Finally, success. Freespire took about 30 minutes to install, and it was painless. It immediately recognized the PCMCIA Card. I setup wireless networking, with WEP (WPA is still flaky in this distro) and then installed the network printer. I now have the laptop downstairs in the “man cave” for access to the internet, etc. If I wasn’t so cheap, I’d buy a battery of Ebay for $50 bucks. Or I may hack it myself. It’s a Nickel Metal hydride battery, pretty easy to replace. Maybe Someday…

Bill

Ubuntu upgrade to Jaunty Jackalope 9.04

Friday, April 24th, 2009

Last night, I took the plunge and upgraded from 8.10 to 9.05 Ubuntu. This has been the smoothest upgrade of all. I only had to add the boot parameters for menu.lst for my windows drive. Sweet. Everything works, video, sound, etc. Everything. Things do get better with age!

Bill

Switched to LINUX

Tuesday, April 21st, 2009

About two years ago, I switched to UBUNTU LINUX on my work machine at home. I also loaded the server version onto a couple boxes in the basement. I switched because I wanted to try something new, and I saw the programmers that I worked with use LINUX for everything. I was also paying about $400 bucks a year for a Microsoft Action Pack subscription to get copies of the latest and greatest software, that I used less and less.

So how has it been? Fairly smooth, with some caveats. One less than smooth spot early on, was the Nvidia driver chase every time the kernel and headers were updated. Usually I had to go through a short but irritating reinstall of the correct driver, to get my high resolution back. Lately this problem has disappeared. Now, I am running two monitors off the same card, using twinview, and it rocks.

I have a couple programs that I haven’t swapped for LINUX equivalents. For that, I have a dual boot option in GRUB, the boot loader, so I can also boot into a WINDOWS XP system if needed. This was another rough spot. Searching discussion forums to find the correct combination of parameters to boot the windows drive was lengthy. The windows drive was IDE, and the LINUX drive was SATA, which was also tricky initially. I also found my motherboard wouldn’t support SATA and IDE together, even though the documentation said it would. I had to install an additional SATA controller card to fix this.

The latest rough spot was when they last pushed out a kernel and header update. My machine failed to find the boot drive. Once again, after searching discussion forums, I found the correct delay parameter to put into GRUB. Now it boots reliably.

I seem now to have experienced all the big problems with a LINUX UBUNTU system. Bear in mind, I have relatively old hardware, such as the Athlon XP 3200 processor. Installs on newer hardware have all gone perfect, and so have all the updates. I have even installed Simply Mepis and Damn Small Linux on systems, and they are working flawlessly. I can place DreamLinux on a thumb drive, and take it with me anywhere.

I use OpenOffice applications for general business, and it integrates well with MS Office. For the one windows program I haven’t migrated to this point, I use VMWARE to load a copy of windows XP, and run the program in there, rather than booting to the old Windows Drive.

Now I just have to put up with my coworkers telling me ‘I told you so”. I’ll pay that price.

Billrad

A mere vulgar craftsman….

Friday, January 9th, 2009

chinesepainting2a

I was listening to a podcast this morning out of Australia on ancient Chinese history, on my way to work in southern Ohio, on my Japanese MP3 player in my Swedish car. (kinda global, isn’t it…) The speaker was talking about acient Chinese landscape painters, and how they thought it below their dignity to be paid for their work. In fact, they thought it would make them mere vulgar craftsmen, something to be despised.

Also lately I’d been reading The History of the Ancient World, and the discussion of Ancient Greece, about 500 B.C. Chester Starr was relating the fact that none of the ancient Greeks would work for anybody. Even the lowest Greek on the totem pole scratching around on his plot of dirt was too proud to work for wages. His activity was aimed at getting together a couple of bucks so that he could buy some slaves to do all the work for him.

So what’s up with that?

Seems to me, if it wasn’t for all these vulgar craftsmen who did all the work, there wouldn’t be any classical civilization, and all these guys would have starved to death before they got anything accomplished.

Maybe there is something wrong with me, but I like being a craftsman. I fix machines that have come to grief is some way or other and make them right again. And I get a check every week for doing it. And once you start fixing one kind of machine, you never stop there. You start fixing everything, cars, computers, cell phones… whatever gets in your way that’s broken. It becomes a way of life. I can’t stand not knowing how something works, and that does become problematic in this day and age, as even the engineers that think this stuff up don’t understand it.

However, here’s to the Chinese guy, I hope some vulgar guy makes him some paint!

greg

If you want an account on the Spechtacle…

Friday, January 18th, 2008

If you want an account on the Spechtacle, you may:

1. email rademacher@armoredplanet.com and request one

2. register in the Spechtacle, and we will approve your joining the fray

3. send a million-billion dollars in a suitcase to 105 Blueball Road, Rineyville Ky 40162

Feel free to skip right to number 3, if you have a suitcase…

Hot Rod and Retro Computers…

Monday, February 19th, 2007

http://marketplace.publicradio.org/shows/2007/02/06/PM200702065.html

The above link is to a Story on PC Modders and German computer cabinet maker Nicholas Schmidt and some of their gems they have made…
>b_wood_computer_back.jpg
Then there were these guys from the Austin Modders club..

90549143_fcc15a7803.jpg Everybody likes a Hot Rod
greg